EVERYDAY LIPID / Nutrition & Health Research
Scientific scoping review · October 30, 2026

Microplastics in Retail Vegetable Oils: Packaging, Global Evidence, and Maternal–Infant Health

A critical review of PET, polyethylene, polypropylene, glass and metal packaging, analytical measurements across markets, and what emerging evidence means—and does not mean—for pregnancy, lactation and infancy.

Abstract

Microplastics have been identified in commercially distributed edible vegetable oils, including products sold in PET and glass bottles. Studies in Italy and Spain, Türkiye and Bangladesh report widely differing particle abundances; methodological differences limit direct comparison. This review evaluates polymer identity, packaging pathways, regional evidence gaps and maternal–infant exposure research, while distinguishing particle detection from demonstrated health harm.

Central finding. The literature demonstrates microplastics in retail oils, but does not establish that every plastic-bottled oil contains more particles than glass-bottled oil. Likewise, particles have been reported in human placenta and breast milk, but an oil-specific causal pathway or clinical harm at ordinary dietary exposures has not been demonstrated.

1. Scope and methodology

Targeted searches of scholarly databases, indexed abstracts and primary research journal pages focused on edible oils, microplastics, PET, HDPE/LDPE, polypropylene, glass containers, FTIR and Raman spectroscopy, pregnancy, human placenta and breast milk. Only directly measured edible-oil studies were used to describe oil particle concentrations. Studies of other food-contact materials were treated as mechanistic context, not vegetable-oil observations.

This is a preliminary scoping review, not a PRISMA-compliant systematic review. The included studies differ in their particle-size detection limits, solvent preparation, contamination controls and polymer identification. Study means therefore cannot support a regional ranking or a pooled global concentration.

2. Quantification in commercial edible oils

Region / studyProduct and package informationReported particles/LTechnique and interpretation
Italy and Spain — Battaglini et al. 2024Olive, sunflower and mixed vegetable oils; PET and glass1,140 ± 350 averageAutomated μ-FTIR, 5-μm filtration; fragments common. [1]
Türkiye — Şirin et al. 202628 olive and sunflower oils; PET, tin and glass1,357 ± 663 averageμ-Raman; oil types and packages not fully matched. [2]
Bangladesh — Meem et al. 202660 samples of branded and non-branded soybean oils; not a controlled glass-versus-plastic trial53,922 ± 10,510 averageOptical screening and FTIR; fibers dominate, identification and size criteria differ. [3]
Unassigned retail market — Guo et al. 2023Four commercial PET-bottled edible oils134,000–580,000 observed rangeRaman-based detection; >80% below 10 μm. Sampling-market geography not established in reviewed abstract. [4]

Figure 1 · Reported mean microplastic counts in three retail-oil studies

10^310^410^5Italy / Spain · 20241,140μ-FTIRTürkiye · 20261,357μ-RamanBangladesh · 202653,922Microscopy + FTIRParticles per liter · logarithmic scale
Reported mean counts are visualized on a logarithmic scale. Comparison is illustrative only: the studies differ in sampling, particle-size limits, polymer verification, and contamination-control methodology. Source data: [1–3].

3. Regional overview

Europe — Italy and Spain

Microplastics were reported across all investigated retail oil types and bottles, including PET and glass packaging. Of identified particles, 81.2% were fragments and 77.5% were smaller than 100 μm. Polyethylene represented 50.3% and polypropylene 28.7%. Investigators did not find a statistically significant difference between the oil samples or types in the reported analysis. An isolated PET-versus-glass causal effect was not established. [1]

Türkiye — a transcontinental market

The 2026 study analyzed 28 commercial olive and sunflower oils with packaging categories including plastic, tin and glass. PE, PP and PET were prominent. Because packaging and oil-type categories were not fully crossed, the data are informative about occurrence but are not a clean packaging-material experiment. The article's highlights and abstract differ in the reported minimum–maximum range; readers should refer to the full paper for category-specific figures. [2]

Asia — Bangladesh and storage research

The Bangladesh study found higher microplastic counts in non-branded than branded soybean oil and a predominance of fibers. Open-market handling and reused containers were discussed as potential influences. That comparison is not evidence of a specific PET-versus-glass effect. Separately, a 2026 controlled storage study found changes in particle abundance and size distributions in edible oils over time, supporting assessment of storage temperature and duration. [3] [5]

North America

The reviewed evidence does not establish a harmonized, representative PET-versus-glass comparison for North American retail cooking oils. The 2023 bottled-oil paper was authored by U.S.-affiliated researchers, but its sampling-market geography cannot be inferred from institutional affiliations. Regional market mapping remains an open research priority. [4]

Africa

No sufficiently comparable, packaging-stratified quantitative study of commercial retail vegetable oil was verified for an African market in this targeted search. That is an evidence gap, not evidence that contamination is absent. Follow-up sampling should distinguish sealed, commercially bottled oils from bulk and refill distribution systems.

4. Packaging systems and polymer identity

PET bottle bodies, polyethylene (including HDPE and LDPE) components, polypropylene closures, glass bottles, and lined metal containers require separate evaluation. Detection of PE, PP or PET in an oil sample cannot alone identify the source; polymers may be introduced during oil processing, packaging, handling, storage or sample preparation.

Figure 2 · Polymer composition identified in the Italy–Spain study

μ-FTIREuropean oils PE — 50.3% PP — 28.7% Other polymers — 21.0% Composition does not establish origin.
PE, PP and other identified polymers as percentages of analyzed particles, not percentages derived from particular packaging components. Data: Battaglini et al. [1].

Glass bottle bodies are not themselves a source of synthetic plastic particles, but caps, liners, transport equipment, filling operations and background contamination can still contribute. Likewise, metal packages may have polymer coatings or seals.

In an accelerated PET-bottle study at 40°C for ten days, Guo and colleagues reported no detected PET particle release attributable to the bottles under the tested conditions. This result cannot establish that PET is universally free of migration under all manufacturing or storage conditions. [4]

Figure 3 · Conceptual packaging-to-exposure pathways

Oil ingredientsBaseline particles / sources Processing equipmentTubes · seals · filtration Complete packagingBottle · cap · liner · filling Particles detected in retail oilPresence ≠ source attribution Maternal ingestionExposure route possible Placenta / breast milkDetection reported; oil link unproven Infant food contactFeeding materials are another route Causal health effects at typical dietary exposures have not been established.
Potential contributions at raw-material, processing and packaging stages. The downstream diagram depicts hypotheses and separate observations, not a demonstrated direct chain from vegetable oil to placenta or breast milk.

5. Pregnancy: what human placental findings mean

The placenta has been studied as one possible compartment in which particles may be identified. Yun and colleagues used Raman microspectroscopy in 50 placentas and detected 40 particles in 31 samples; their results did not establish statistically significant differences in the assessed maternal and neonatal outcomes between the studied polymer groups. [6]

Laboratory work suggests possible mechanisms—oxidative stress, inflammatory signaling, and cellular responses—but experimental exposures do not necessarily reproduce human consumption of retail vegetable oils. Neither a causal route from edible-oil packaging to placental particles nor an attributable pregnancy outcome has been demonstrated. Other possible sources include other foods, beverages and airborne particles.

6. Lactation and breast milk: detection is not a risk conclusion

Ragusa and colleagues detected microplastic particles in 26 of 34 breast-milk samples using Raman microspectroscopy. A later study reported detection in 23 of 59 samples. These results document detection in research samples; they do not quantify infant harm or identify edible cooking oils as the source. Differences in study protocols preclude treating the positive-sample fractions as population prevalence or a reliable trend. [7] [8]

Figure 4 · Detection frequency in selected human biological-sample studies

Breast milk · Ragusa 202226/34 (76.5%)Breast milk · 2024 study23/59 (39.0%)Placenta · Yun 202431/50 (62.0%)Different tissues, methods and sample populations — do not compare as exposure doses
Study-specific fractions of samples with microplastics identified. These are not dose or risk measurements; placenta and breast milk are different biological matrices, with different sampling and analytical methods. Data: [6–8].

Breastfeeding should not be discouraged on the basis of these findings. The WHO recommends exclusive breastfeeding for the first six months, followed by appropriate complementary foods and continued breastfeeding up to two years or beyond. The documented benefits of breastfeeding remain relevant despite unanswered questions about microplastic exposure. [11]

7. Infants: food contact, feeding equipment and complementary foods

Infant exposure can include direct contact with feeding materials. Li and colleagues reported experimental polypropylene feeding-bottle particle release reaching 16.2 million particles/L under certain test conditions, with temperature and preparation procedures influencing results. That experiment is not an edible-oil study and does not establish a typical daily infant intake. [9]

After complementary foods are introduced, cooking oils may contribute some dietary particles, but oil-specific proportions of total infant exposure have not been established. Food-safety instructions and hygienic infant-feeding practices should not be compromised in attempts to reduce hypothetical particle exposure.

8. Evidence hierarchy and human-health interpretation

QuestionCurrent interpretation
Are microplastics detected in retail vegetable oils?Yes. Multiple direct studies report occurrence.
Are they detected in some human placentas and breast-milk samples?Yes. Research detection has been reported, with substantial measurement limitations.
Does PET always produce higher oil microplastic concentrations than glass?Not established. Matching and source-specific control studies are needed.
Have oil-derived particles been traced into human placenta or breast milk?No demonstrated oil-specific causal pathway.
Do typical edible-oil exposure levels cause pregnancy or infant health harm?No established clinical causality. Evidence and exposure models remain insufficient.
Does changing cooking-oil packaging improve maternal or infant clinical outcomes?Not demonstrated.

EFSA states that it has not completed a full food-related microplastics risk assessment and that knowledge of dietary exposure and human-health effects remains limited. Current evidence therefore does not justify assigning a universal “safe” particles/L limit or making claims that one commercial oil protects fetal or infant health. [10]

9. Recommendations for the next comparative study

The strongest next step would be a harmonized multi-market surveillance program, followed by controlled packaging trials. The initial retail phase should stratify each market by oil category, packaging polymer, bottle size, lot, storage history and shelf age. All samples should be measured using predeclared particle-size cutoffs and spectroscopic criteria, with method blanks and recovery experiments.

Figure 5 · Recommended controlled study design

One homogeneous oil batchMeasure baseline + blanks Amber glassClosure/liner includedPETMatched fill/closureHDPEMatched fill/closureMetalCoatings/liner included Day 0 / 30 / 90 • 20–25°C and accelerated 40°C • n ≥ 3 independent packagesμ-Raman + μ-FTIR; report size classes, particle numbers, polymer identities, blanks and recovery
Design concept: the same bulk batch is split into independently replicated PET, HDPE, amber-glass and metal systems. Measure the unopened base oil and the complete filling and closure contributions. Sampling points and replicate counts are proposed research design parameters, not results from a completed experiment.

The primary outcome should be blank-corrected, spectroscopically verified particles/L by size class and polymer identity. Secondary measures could include polymer mass using Py-GC/MS, particle morphology, bottle and closure material analysis, temperature sensitivity and time-dependent change. In oil matrices, recovery and detection thresholds are particularly important to interpret cross-study differences.

10. Conclusions

The emerging literature demonstrates that edible oils may contain microplastic particles across different packaging types. PE, PP and PET are among the materials identified, but polymer identity alone cannot establish contamination sources. Reported concentrations vary substantially, and direct regional comparisons are methodologically inappropriate without harmonized procedures.

The early-life exposure literature documents microplastics in selected placenta and breast-milk samples and laboratory release from some feeding bottles. It does not yet demonstrate that microplastics from cooking-oil packaging cause adverse pregnancy, lactation, or infant health outcomes.

For consumers and the food industry, an evidence-led response emphasizes contamination prevention, packaging-system testing, improved analytical quality control, transparency about uncertainty and preservation of established maternal and infant nutrition advice.

Important health communication note: This publication provides general scientific education, not individual medical guidance. It does not imply that breast milk is unsafe or that any retail cooking oil is proven to prevent pregnancy- or infant-related health problems.

References and source links

  1. Battaglini E, et al. (2024). Analysis of microplastics in commercial vegetable edible oils from Italy and Spain. Food Chemistry 443, 138567. Source ↗
  2. Şirin M, et al. (2026). Microplastic contamination and associated health risks in edible sunflower and olive oils: The first evidence from Turkey. Food Control, 112562. Source ↗
  3. Meem RA, et al. (2026). Microplastic contamination in branded and non-branded edible soybean oil from Bangladesh. Journal of Food Composition and Analysis 152, 109005. Source ↗
  4. Guo X, et al. (2023). Detection and quantification of microplastics in commercially bottled edible oil. Food Packaging and Shelf Life 38, 101122. Source ↗
  5. Huang C, et al. (2026). Detection and variation trends of microplastics in edible oils during storage. Food Control 188, 112261. Source ↗
  6. Yun X, et al. (2024). Raman-guided exploration of placental microplastic exposure. Journal of Hazardous Materials 477, 135271. Source ↗
  7. Ragusa A, et al. (2022). Raman microspectroscopy detection and characterisation of microplastics in human breastmilk. Polymers 14, 2700. Source ↗
  8. Detection of microplastics in human breast milk and its association with changes in human milk bacterial microbiota. (2024). Journal of Clinical Medicine 13, 4029. Source ↗
  9. Li D, et al. (2020). Microplastic release from the degradation of polypropylene feeding bottles during infant formula preparation. Nature Food 1, 746–754. Source ↗
  10. European Food Safety Authority (2026). Microplastics and nanoplastics in food. Last reviewed October 21, 2026. Source ↗
  11. World Health Organization (2026). Infant and young child feeding. Updated August 4, 2026. Source ↗